11/7/2022 0 Comments Connect delta hmi to fuji plc> USBCommMode and set the mode as 0 or 1 or 2.ģ.Ěfter setting up, press the top right corner to go back to the HMI project screen. Upon entering the HMI system menu, press the screen to enter System Setting > Misc. When the button is pressed, the buzzer will respond with a “beep” as notification (this is normal, not a warning).Ģ. Press the system menu button on the back of the HMI for 2 to 3 seconds. In this case, the user has to set up the system by pressing the system menu from the back of the HMI. If the connection between the HMI and computer is not established before the beginning of the project, new settings won’t be uploaded or downloaded. If the USB permission is restricted by the IT department, please set to mode 2 (CDC mode). Go to Options > Configuration > Others > USB Downloadġ.ğor Windows XP, the upload/download mode should be set to 0 (normal mode).Ģ.ğor Windows 7, 8, or 10, the upload/download mode should be set to 1 (disk mode)ģ. The user has to configure the HMI in accordance with different computer operating systems. Generally, the connection between the HMI and computer is established through a USB type B connection wire for uploading and downloading.
0 Comments
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |